Bond&Fill® There's nothing like it.
Bond&FILL® POWER™Bond&Fill® There's nothing like it.
Bond&Fill® There's nothing like it.

About Bond&Fill
Products
How to apply
Product Videos
Warranty/MSDS
Comparison Chart
Where to purchase
Go Shopping
News/Events
Dealers/Distributors
OEM
Contact Us
FAQ
Home
New! - Bond&Fill SlowCure - This 2-part acrylic structural adhesive and filler, with a work life of 45 to 60 minutes.
New! - Bond&Fill® TrimSTICK™ - A two-part epoxy putty formulated to bond, fill and repair PVC trim-boards. Designed for both exterior and interior applications, TrimSTICK™ has a 20-25 minute work life and fully cures after 2-3 hours.
New! - Bond&Fill SlowCure - This 2-part acrylic structural adhesive and filler, with a work life of 45 to 60 minutes.
New! - Bond&Fill Power - Cleans everything washable. Use on PVC, vinyl, and aluminum
New! - Bond&Fill Buddy - Stay organized with this rugged 5-gallon Key Organizer
New! - Contractor Packaging - Our 8.1 FastCURE and SlowCURE cartridges are being packaged more conveniently and economically for contractors.



 

Bond&FILL® POWER™
Bond&Fill® POWER™ is an industrial strength cleaner that cleans everything washable without bleaching. Use on all PVC, vinyl and aluminum. You can adjust the strength to fit the job. Safe on hands, nontoxic and has no phosphates. Available pre-mixed and in concentrate. 32 oz. of concentrate = 5 gallons of cleaning solution. The Cleaner THAT WORKS!

Bond&Fill® POWER™
PRE-MIXED
22 fluid oz.

Bond&Fill® POWER™
Concentrate
32 fluid oz.


Finish the job quick and easy
with Bond&Fill® Power™

Bond&Fill® Inc., manufacturer of proven products for the
building industry, has formulated Bond&Fill® Power™ to clean
everything washable without bleaching.

FOR LIGHT-DUTY CLEANING — Mix 1oz. Bond&Fill® Power™ concentrate with 31 oz. water

FOR MEDIUM-DUTY CLEANING — Mix 1.5 oz. Bond&Fill®
Power™ concentrate with 20.5 oz. water
Available PRE-MIXED by Bond&Fill®.

FOR HEAVY-DUTY CLEANING — Mix 1 oz.
Bond&Fill®Power™ concentrate with 10 oz. water

NOTE — Apply to area to be cleaned and let sit for up to 30 seconds, then wipe off with clean cloth.

HELPFUL HINTS — To increase the power of Bond&Fill® Power™ spray on the soiled area and let sit for 30 seconds or more. Repeat if necessary before increasing the strength of the solution

Safe and Easy On The Hands
Nontoxic
No Phosphates

Keep Out Of Reach of Children
This product is U.S.D.A. acceptable for use in official establishments operating under the Federal Meat, Poultry, Shell Egg Grading and Egg Products inspection programs. When used as indicated, manufacturer makes no warranty expressed or implied, beyond product replacement, because manufacturer cannot control user’s handling, use, or effective use.



THE CLEANER THAT WORKS!
No other powder, liquid or spray can compete

Bond&Fill






Bond&Fill® There's nothing like it.
Bond&Fill® There's nothing like it.  
Bond&Fill® There's nothing like it.

ABOUT BOND&FILL® | PRODUCTS | HOW TO APPLY | TECHNICAL INFORMATION/WARRANTY
COMPARISON CHART | WHERE TO PURCHASE | GO SHOPPING | WHAT’S NEW/EVENTS
DEALERS/DISTRIBUTORS | CONTACT US | HOME | SITE MAP

© Copyright 2008 Bond&Fill®, Inc. All Rights Reserved.

Bond&Fill® There's nothing like it.
Bond&Fill® There's nothing like it.